. BeoSound 5 Encore Installation Guide for installation and setup of BeoSound 5 Encore English – Version 1.3. Introduction Introduction With BeoSound 5 Encore the customer can access digital content from a recommended Network Attached Storage (NAS) or a BeoMaster 5 in a an extended ‘Client software’, e.g.
BeoConnect – from a connected PC or MAC. The connection between BeoSound 5 and the Network Link system can either be. Installation Introduction Installation Installation overview The following section describes the step-by-step installation of BeoSound 5 Encore. In order to obtain a problem-free and smooth Connection installation, follow the instructions carefully. Wired connection Wireless connection (LAN) (WLAN) Installing during an installation. Link room Technical control room existing network Master Link Home Automation Internet System (192.168.1.X) ML Gateway Radio/CD BeoSound 5 Encore BeoSound 5 Encore (192.168.1.10) ISP router Client PC/MAC (192.168.1.1) Video master (192.168.1.X) Network Link BeoSound 5 Audio/Video Bang & Olufsen (192.168.100.X).
Wired connection (LAN) and other physical connections Wired connection (LAN) and other physical connections Connecting the product First step is to connect all necessary cables to the product. See the socket locations below: POWER POWER LINK 0.5 A POWER For connecting the music system to the mains using the supplied power supply USB connection –. Wireless connection (WLAN) and other physical connections Wireless connection (WLAN) and other physical connections Connecting the product POWER POWER LINK 0.5 A POWER For connecting the music system to the mains using the supplied power supply. USB connection – for permanent music storage on POWER LINK Power Link socket for loudspeaker connection - Loudspeaker connections –. Installing power supply Installing power supply before connecting the unit. DO NOT CONNECT TO THE MAINS YET! Connecting the product Strip the wire ends and mount them as shown below: Silver Black Green Silver Green Black Mount the power supply Mount the bracket for power supply.
Preparing setup Perform the next basic settings before continuing to the setup part. Connect to mains Connect the power supply to the mains. When the startup procedure is running (takes approximately one minute), the LED lights red and the screen is black. The product is ready, when the source menu appears on the screen. Pincode switches to standby after approximately three minutes. Ethernet switch and use the default password admin.
(192.168.100.X) (192.168.100.1) BeoSound 5 Encore Now the setup screen appears. IP addresses are only examples Routing, etc. Where network settings can be made. The purpose of changing the IP address is to dedicate an open space for customer’s existing network. Click on the tab Management Click on the Save Settings button to store settings. From this point, the installer must continue the installation by choosing which kind of network connection BeoSound 5 Encore is connected to: Network settings (LAN).
Bang And Olufsen Beoconnect (for Mac User Guide Page: 1793
Network settings (LAN) The next step is to ensure that the network connection is correct in order to be able to acces the network components, the Internet, ect. The Check network connection By default the product is set to obtain network settings such as IP address and MODE In this case it is not necessary to perform any network settings. Network settings (WLAN) The next step is to ensure that the network connection is correct in order to be able to access the network components, the internet ect. Methods are safe, so it is recommended to choose the easiest solution, listed in descending order.! Only WEP, WPA and WAP2 is supported encryption standards WIRELESS - WPS (recommended) that the router has this feature. WIRELESS - AUTO The WIRELESS - AUTO manually.
Follow the procedure below to establish the wireless network connection: Use the pointer to highlight MODE. Turn the wheel to select SETTINGS, and press GO. MODE Use the pointer to highlight NETWORK SETTINGS. WIRELESS - MANUAL The WIRELESS - MANUAL Set ID When this method is used, the installer must know the exact name of the SSID, the encryption type and the wireless password of the router.
Follow the procedure below to establish the wireless network connection:. NETWORK SETTINGS NETWORK SETTINGS.
Check network connection By default the product is set to obtain network settings such as IP address and MODE SOUND Protocol). In this case it is not necessary to make network settings.
HOSTNAME BeoSound5-Encore-xxxxxxxx SYSTEM SETTINGS MAC ADDRESS 00-09-A7-00-C1-09 DHCP. Connecting to network server existing network Home Automation Internet System (192.168.1.X) ML Gateway (192.168.1.10) ISProuter (192.168.1.1) (192.168.1.X) Network Link Windows 7 Windows Media Server Home Server (192.168.100.X) Bang & Olufsen Network Link router Smart Phone BeoMaster 5 (192.168.100.1) Ethernet switch Client PC/MAC (192.168.100.X) IP addresses are only examples. BeoMaster 5 (music server) BeoSound 5). The following example is based on an existing BeoSound 5 installation. Follow the procedure below: Use the pointer to highlight MODE. Turn the wheel to select SETTINGS, and press MODE Use the pointer to highlight SERVICE SETTINGS. NAS server (UPnP) the following: Home Automation Internet System (192.168.1.X) ML Gateway (192.168.1.10) ISP router Depending on whether it is a completely new installation or it is an expansion of an existing network (192.168.1.1) (192.168.1.X) setup.
When the case is an existing network with a NAS server, the DLNA function must be activated manually. DHCP reservation Open a web browser and enter the IP address for the Network Link router (192.168.100.1). Enter the password in the login box. Click the tab Setup, Basic Setup, and in the section Network Setup- DHCP Server Setting click on the DHCP Reservation button. Check for software update Follow the procedure below to check and install any software updates: Use the pointer to highlight MODE, turn the wheel to select SETTINGS, and press GO. Use the pointer to highlight MAINTENANCE, turn the wheel to select UPDATE SOFTWARE, and press GO.
Contents Introduction.2 Introduction Installation.Installation.3 Connection.Connection.Wired connection Wireless connection Wired connection (LAN) and other physical connections.5 (LAN) (WLAN) Wireless connection (WLAN) and other physical connections.6 Installing power supply.7 Installing power supply Preparing setup.
Specification Brand Beoplay Features TRULY PORTABLE: AMPLIFY ANYWHERE Splash and dust resistant design. Take Beoplay P2 with you wherever you go, all thanks to splash and dust resistant drivers inside the speaker and a tightly sealed casing of aluminium and polymer. And weighing in at a very light 275 grams, it fits easily in your pocket or bag. SMART FEATURES: FEATURES VIA BEOPLAY APP Shake and tap to customize. No switches or buttons required. A quick shake or an double tap will activate Beoplay P2’s smart features.
Play, pause or skip tracks, launch your favourite personal assistant or get Beoplay App to wake you up with the same music you were listening to yesterday evening. SOUND: OUTSTANDING PERFORMANCE Rich and spacious Bang & Olufsen Signature Sound. Thanks to Bang & Olufsen Signature Sound, Beoplay P2 delivers a rich spacious sound and good definition of bass and kick drums. The speaker is supported by a new, mid-woofer driver and a peak power of more than 2 x 50 Watts. A built in microphone can be used for calls and voice activation. MATERIALS: PREMIUM DURABLE MATERIALS Crafted aluminium, leather and polymer. Like a pebble you find on the beach, the appearance of Beoplay P2 is rounded, smooth and fits perfectly in the palm of your hand.
On the outside, premium crafted materials make up the strong casing of Beoplay P2 with a pearl blasted anodized aluminium grill over the speaker and durable polymer underneath. Available in Black, Sand Stone or Royal Blue colours. BATTERY: UP TO 10 HOURS OF BATTERY LIFE Smart charging with USB-C cable. Beoplay P2 gives you music non-stop for up to 10 hours on one battery charge – enough for a party.
And there’s no need to switch it off. With a 15 minute stand-by function, you save battery and can keep your music going for longer. Farming simulator 2008 download softonic for mac. Technical Specifications DIMENSIONS: 140 x 80 x 28 mm WEIGHT: 275 g 9,7 oz DESIGNER: Cecilie Manz COLOURS Black Sand Stone Royal Blue EFFECTIVE FREQUENCY RANGE: 68 Hz - 21.000Hz CONNECTIVITY 1 x USB-C for charging and microphone MATERIALS: Polymer Pearl blasted Aluminium leather rubber BLUETOOTH: Bluetooth 4.2, ADK 4.0.
MICROPHONE: One electret type, omni-directional. Supports Apple Siri and Google Now voice commands. POWER AMPLIFIERS: 2 x 15W class D for woofer and tweeter (2 x 50W peak power). BATTERY: Up to 10 hours playtime at moderate listening level. Built-in Lithium-Polymer, rechargeable, 7,2V, 2200mAh, Li-Ion. Charging time: 2 hours.
Bang And Olufsen Beoconnect (for Mac User Guide Page: 1799
SMART CHARGING: With Beoplay P2’s smart charging USB-C cable, you can use any wall charger. EOPLAY APP: Compatible with Beoplay App which will enhance your B&O PLAY experience. In the Box INCLUDED IN THE BOX: Quick user guide, USB-C to USB-A cable. ON DEVICE CONTROLS: Tap- and shake interactions which can be customized in Beoplay App. Press the B&O PLAY button on the bottom side to turn power on/off.
ITEM NO PRODUCT TYPE S/W 8343999 AC 3 module, Avant (32 IC 607) 4003/4019 1.9 8344177 AC 3 s.w. With DTS 3.01a 8344371 AC 3, BEOSYSTEM 1-2 2.4 8343351 A/V 7000, software for code converter(PCB 13) 2346 2. BEO 4, DVD 162X 4.2 8003006 BEO 4, VMEM 162X FLASH TOOL BEO 6 1711 3.30a 8343164 BEOCENTER AV5 (6 IC 1 + 6 IC 2) 82XX 1.
BEOCENTER AV5 (6 IC 1 + 6 IC 2), new Sat 82XX 3.4 8340079 BEOCENTER AV5 (87 IC 202) 82XX 1.2 8343837 BEOCENTER 1 (6 IC 3 + 6 IC 4) 85XX 2.3 8344047 BEOCENTER 1, Update (6 IC 3 + 6 IC 4) 851X 3.1 8344241 BEOCENTER 1, Update (6 IC 3 + 6 IC 4), service soft ware 851X 3. BEOCENTER 1, Update 2(6 IC 3 + 6 IC 4) 852X 2.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |